Showing 1–12 of 87 results
-
Bespoke Fabric Tablecloths
( reviews)£18.00Corners
As standard, rectangular tablecloths are made with right-angled corners, but rounded corners can be ordered at no extra charge. If you would prefer the tablecloth to avoid ‘gathering’ around the corners. Due to the nature of fabric finishing, a minimum corner radius of 300mm is required. If rounded corners are required, please let us know the radius/size of the rounded corners when ordering.
Commonly-Ordered Sizes
For a 6ft Trestle table (1800mm (W) × 740mm (D) × 725mm (H)) and a 600mm drop length, it is common to order a 3000mm × 1940mm tablecloth. View this tablecloth in our price calculator.
Other Tablecloths Shapes and Sizes
For any bespoke shapes, alternative corners, or anything not covered above, please contact us for detailed advice and a bespoke quote.
-
Bespoke Flags
( reviews)£15.00Artwork
To help ensure your artwork is processed quickly and without any problems, please refer to our artwork requirements.
For any Bespoke Flags items, 50mm bleed must be supplied. This allows for any extra material required for hems, as well as shrinkage and movement when printing and cutting.
Notice
Our thread colours are black or white. Our sewists will choose the most appropriate colour to complement your graphic.
Currently we can only print up to 3 metres on the shortest edge, to our standard pricing. Flags above this size will need a bespoke quotation.
Consider where you position your flag, as air pollution will cause the white areas to become grey and UV can, over time, cause deterioration and fading to the fabric.
Flags can be washed in a regular washing machine on a 40° wash with everyday detergents. Always allow your flag to completely dry out before storing.
Ensure that your flag doesn’t catch or snag on its pole or any other surrounding objects. Do not place poles too close together.
Dismantle your flag during adverse weather conditions, including strong winds in excess of beaufort scale 4 (13-18mph). Heavy rain combined with high winds can increase the weight of the flag and put extra strain on the pole.
Life expectancy is entirely dependent on the climatic conditions and hours of flying. Realistic maximum lifespan of a regularly used flag is six months.
-
Blizzard Outdoor Banner Stand
( reviews)£149.00The magenta dots indicate where the eyelets will be placed. For InDesign and Illustrator users, these marks are currently on a layer that will not be included in any exported PDFs, however you may remove them if you wish. Please make sure the marks are not displayed in your print-ready file(s) before sending, especially if you aren’t using InDesign or Illustrator.
The inner margins indicate approximately where the welded hem area will be. We recommend only using this as a quiet area for backgrounds.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.
-
Bollard Covers
( reviews)Price range: £7.85 through £13.76- Bollard Cover (Triangle, ⌀ 100mm Bollard, 800mm Tall)187mm sides + tabs
- Bollard Cover (Triangle, ⌀ 150mm Bollard, 800mm Tall)274mm sides + tabs
- Bollard Cover (Triangle, ⌀ 200mm Bollard, 800mm Tall)360mm sides + tabs
- Bespoke Size Bollard Cover
-
Counta Indoor Stand
( reviews)£115.00Base
The small areas indicated by the margins/guides at the top and bottom of the base will be completely concealed by the unit. Please only use these areas to bleed any background colours or images.
The central area will become the front graphic. The left and right areas will become the sides and will only be visible from the sides of the unit.
Please note the gaps between the center and side graphics. These areas (7mm width) will not be printed and will instead be used as a gutter for the folds of the corners.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.
-
Crest Flag
( reviews)Price range: £75.00 through £160.00Shape
- The red line is the bleed line. Artwork must extend to this line. The area in between this line and the safe area line must only be used as a quiet area.
- The purple line is the cut line. Perimeter of the cut graphic area, before any finishing. The area in between this line and the finished line will be used for hems and attaching the sleeve.
- The blue line is the finished line. This is the perimeter of the visible graphic area, after the graphic has been finished.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within this line.
- The grey line is the flag sleeve. This shows the location of the elasticated flag sleeve, when finished and attached.
Layers
Please note, this template contains a locked layer that is set to be non-printing. Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.
- Guide (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
- Design. Must be used to create and supply your design.
Artwork Requirements
Flag artwork must be supplied:
- At the exact size of the template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With all important content inside the safe area
- With background/quiet content all the way to the bleed line
- With none of the template guide lines included or flattened
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked that all design elements are included
- With both front and back designs included (applies only to double-sided flag templates)
-
Deluxe Cafe Barriers
( reviews)Price range: £180.00 through £275.00Layers
- Instructions (locked). Can be turned off or removed before exporting your print-ready file, if desired.
- Areas & Marks Overlay (locked). Must only be used as an overlay, and must not contain any design elements. Must be either turned off or removed before exporting your print-ready file.
- Stitching (locked). Can be made visible to show where stitching will be located. (Applicable only to single-sided graphics)
- Design. Should be used to create and supply your design.
Areas & Marks
- The red line is the bleed line. Artwork must extend to this line. Any space between this line and the safe area line must only be used as a quiet area.
- The purple line is the trim line. The material is cut along this path.
- The blue line is the finished line. Perimeter of the visible area, after finishing.
- The green dashed line is the safe area line. Important content (text, logos etc.) must be kept within these areas.
- The grey line is the stitching line. Indicates the location of stitching along the pole pocket. This is on a separate layer that can be viewed, if desired. (Applicable only to single-sided graphics)
Artwork Requirements
Artwork must be supplied:
- With all template elements removed (such as lines, boxes and markings)
- Without any crop marks or other registration marks
- Using the full bleed area
- Including both pages (even if they are the same design) (double-sided graphics only)
- With any fonts outlined
- With any images embedded
- As either PDF (preferred), AI or EPS format
Please also refer to our full list of artwork requirements.
Considerations
Our thread colours are black or white. Our sewists will choose the most appropriate colour to complement your graphic.
Currently, the dye-sublimation process does not allow for the use of Pantone colours. Any Pantone colours must either be converted to (or replaced with) CMYK colours before supplying your print-ready file.
-
Economy Cafe Barriers
( reviews)Price range: £120.00 through £180.00Layers
- Instructions (locked). Can be turned off or removed before exporting your print-ready file, if desired.
- Areas & Marks Overlay (locked). Must only be used as an overlay, and must not contain any design elements. Must be either turned off or removed before exporting your print-ready file.
- Stitching (locked). Can be made visible to show where stitching will be located. (Applicable only to single-sided graphics)
- Design. Should be used to create and supply your design.
Areas & Marks
- The red line is the bleed line. Artwork must extend to this line. Any space between this line and the safe area line must only be used as a quiet area.
- The purple line is the trim line. The material is cut along this path.
- The blue line is the finished line. Perimeter of the visible area, after finishing.
- The green dashed line is the safe area line. Important content (text, logos etc.) must be kept within these areas.
- The grey line is the stitching line. Indicates the location of stitching along the pole pocket. This is on a separate layer that can be viewed, if desired. (Applicable only to single-sided graphics)
- The magenta circles are eyelet marks. These indicate the locations and size of eyelets.
Artwork Requirements
Artwork must be supplied:
- Including both pages (even if they are the same design). (Applicable only to double-sided graphics)
- With any fonts outlined
- With any images embedded
- Including the document bleed
- With any template elements (such as lines, boxes and markings) removed
- As either PDF (preferred), AI or EPS format
Please also refer to our full list of artwork requirements.
Considerations
Our thread colours are black or white. Our sewists will choose the most appropriate colour to complement your graphic.
Currently, the dye-sublimation process does not allow for the use of Pantone colours. Any Pantone colours must either be converted to (or replaced with) CMYK colours before supplying your print-ready file.
-
Emblem Roller Banner
( reviews)£30.00These templates will help you create your design at the correct size, shape and proportion for the Emblem Desktop Roller Banner, and are setup at 20% scale of full size.
The bottom 4mm area (20mm at full size) should be used as a quiet area for background colours/images only. This section will be hidden and rolled into the unit mechanism.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.
-
Exhibition & Indoor Accessories
( reviews)£65.00-
- LED Twin Pack for SEG Frames and Hop-Ups
-
- LED Twin Pack for Traditional Pop-Ups
-
- SEG Finishing Tool
SEG Finishing Tool
Hand-held tool to aid tidying and finishing of all Silicone Edge Graphics.
When applying Silicone Edge Graphics to products and frames, an untidy edge can become visible. This is caused by excess material being folded back on itself in the groove of the frame. This tool allows for quick and easy correction of this excess material, by pushing the excess material back into the groove.
Recommended for use with:
- SEG Fabric Pop-Ups
- SEG Fabric Pop-Up Counter
- SEG Fabric Free-Standing Lightboxes
- SEG Fabric Wall-Mounted Lightboxes
Can also be used for bespoke Silicone Edge Graphics printed on Display Polyester and Backlit Polyester.
-
-
Fabric Exhibition Solution
( reviews)Price range: £520.00 through £670.00Shape
- The red line is the bleed line. Artwork must extend to this line. Any space between this line and the safe area line must only be used as a quiet area.
- The blue line is the finished line. This is the approximate perimeter of the visible area, after the graphic has been fitted to the unit.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within this line.
Layers
Please note, this template contains a locked layer that is set to be non-printing. Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.
- Guide (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
- Design. Must be used to create and supply your design.
Artwork Requirements
Artwork must be supplied:
- At the exact size of the template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With all important content inside the safe area(s)
- With background/quiet content all the way to the bleed line
- With none of the template guide lines included or flattened
- With all template elements and text removed
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked (e.g. in Adobe Acrobat/Reader) that all design elements are included as intended
- With artwork for both sides included (applies to double-sided versions only)
Please also refer to our full list of artwork requirements.
Considerations
While we make every effort to finish these graphics as accurately and consistently as possible, due to the nature of printing, cutting and finishing fabrics, some material movement and minor imperfections in alignment can be introduced and cannot always be avoided. For this reason, important content, such as logos and text, should not escape the safe areas, and we highly recommend not attempting to span continuous or detailed shapes/lines/patterns/images/borders between front/rear or joining graphics.
Our thread colours are black or white. Our sewists will choose the most appropriate colour to complement your graphic. The only visible stitching when fitted is at the top and bottom of the left and right sides.
Currently, the dye-sublimation process does not allow for the use of Pantone colours. Any Pantone colours must either be converted to (or replaced with) CMYK colours before supplying your print-ready file.
-
Fabric Hop-Ups
( reviews)Price range: £295.00 through £555.00- 2×3 Impact Hop-Up1525mm wide
- 3×3 Impact Hop-Up2260mm wide
- 4×3 Impact Hop-Up2995mm wide
- 5×3 Impact Hop-Up3730mm wide
Shape
- The red line is the bleed line. Artwork must extend to this line. The area inbetween this line and the safe area line must only be used as a quiet area.
- The purple line is the cut line. This is the perimeter of the cut graphic area, before any finishing. The area inbetween this line and the finished line will be used for hems, before any velcro is applied.
- The blue line is the finished line. This is the perimeter of the visible graphic area, after the velcro has been added.
- The green dashed lines are the safe area lines. Important content (text, logos etc.) must be kept within these areas.
- The grey lines are the stitching lines. This is the location of the stitching once the velcro is affixed to the rear of the graphic. This is on a separate layer that can be viewed, if desired.
Layers
Instructions (locked). Can be turned off or removed before exporting your print-ready file, if desired.
Shape Overlay (locked). Must only be used as an overlay, and must not contain any design elements. Must be either turned off or removed before exporting your print-ready file.
Stitching (locked). Can be made visible to show where stitching will be located.
Guides (locked). Can be made visible to show both stitching and corners of the graphic. Useful if the shape overlays have been removed or turned off.
Design. Should be used to create and supply your design.
Considerations
Our thread colours are black or white. Our sewists will choose the most appropriate colour to complement your graphic.
Important content, such as logos and text, should not escape the safe areas or wrap around the corners, as this would result an unsatisfactory appearance.
Currently, the dye-sublimation process does not allow for the use of Pantone colours. Any Pantone colours must either be converted to (or replaced with) CMYK colours before supplying your print-ready file.
