Showing 13–24 of 87 results
-
Feather Flag
( reviews)Price range: £75.00 through £160.00Shape
- The red line is the bleed line. Artwork must extend to this line. The area in between this line and the safe area line must only be used as a quiet area.
- The purple line is the cut line. Perimeter of the cut graphic area, before any finishing. The area in between this line and the finished line will be used for hems and attaching the sleeve.
- The blue line is the finished line. This is the perimeter of the visible graphic area, after the graphic has been finished.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within this line.
- The grey line is the flag sleeve. This shows the location of the elasticated flag sleeve, when finished and attached.
Layers
Please note, this template contains a locked layer that is set to be non-printing. Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.
- Guide (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
- Design. Must be used to create and supply your design.
Artwork Requirements
Flag artwork must be supplied:
- At the exact size of the template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With all important content inside the safe area
- With background/quiet content all the way to the bleed line
- With none of the template guide lines included or flattened
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked that all design elements are included
- With both front and back designs included (applies only to double-sided flag templates)
-
fin Flag
( reviews)Price range: £75.00 through £160.00Shape
- The red line is the bleed line. Artwork must extend to this line. The area in between this line and the safe area line must only be used as a quiet area.
- The purple line is the cut line. Perimeter of the cut graphic area, before any finishing. The area in between this line and the finished line will be used for hems and attaching the sleeve.
- The blue line is the finished line. This is the perimeter of the visible graphic area, after the graphic has been finished.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within this line.
- The grey line is the flag sleeve. This shows the location of the elasticated flag sleeve, when finished and attached.
Layers
Please note, this template contains a locked layer that is set to be non-printing. Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.
- Guide (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
- Design. Must be used to create and supply your design.
Artwork Requirements
Flag artwork must be supplied:
- At the exact size of the template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With all important content inside the safe area
- With background/quiet content all the way to the bleed line
- With none of the template guide lines included or flattened
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked that all design elements are included
- With both front and back designs included (applies only to double-sided flag templates)
-
Flag Bases & Accessories
( reviews)Price range: £12.00 through £49.00-
- Cross-Brace & Weight Bag For Small/Medium single-sided flags.
-
- Large Cross Brace & Weight Bag For Large/Extra Large flags
-
- Metal Ground Spike For all flag sizes
-
- Basic Parasol Base For Small/Medium flags only
-
- Medium Parasol Base For all flag sizes
Flag Carry Bag
Allows for easy transportation and storage of flags and their poles.
Can accommodate:
A folded flag (small/medium/large/extra large)
A flag pole (small/medium/large/extra large)
A flag base. Only: Cross Brace & Weight Bag or Large Cross Brace & Weight Bag or Metal Ground Spike (in dedicated pocket).
Some bases, such as the metal ground spike, can easily fit inside a dedicated pocket inside the bag. Other, larger ones must be kept either with the flag, or loose inside the bag.
Weight bags must be as empty as possible when put in the bag. When putting used bases/spikes in the bag, we recommend wrapping them in plastic to prevent the flag becoming dirty.
-
- Large Parasol Base For Large/Extra Large flags
-
- Premium Parasol Base with Feet For all flag sizes
-
- Square Base (Small / 6.5kg)For Small/Medium flags and indoor use only
-
- Square Base (Large / 10.5kg)For all flag sizes, indoor use only
-
- Car Foot For all flag sizes
-
- Flag Carry Bag
-
-
Flamingo Economy Flag
( reviews)£49.00Shape
- The red line is the bleed line. Artwork must extend to this line. The area in between this line and the safe area line must only be used as a quiet area.
- The purple line is the cut line. Perimeter of the cut graphic area, before any finishing. The area in between this line and the finished line will be used for the hems and pole pockets.
- The blue line is the finished line. This is the perimeter of the visible graphic area, after the hems and pole pockets have been added.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within this line.
Layers
Please note, this template contains a locked layer that is set to be non-printing. Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.
- Guide (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
- Design. Must be used to create and supply your design.
Artwork Requirements
Flag artwork must be supplied:
- At the exact size of the template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With all important content inside the safe area
- With background/quiet content all the way to the bleed line
- With none of the template guide lines included or flattened
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked that all design elements are included
- With both front and back designs included (applies only to double-sided flag templates)
-
Frontier Roller Banner
( reviews)Price range: £109.00 through £249.00These templates will help you create your design at the correct size, shape and proportion for the Frontier Roller Banner, and are setup at 20% scale of full size.
The bottom 30mm area (150mm at full size) must only be used for background colours/images or left blank. This section will be hidden and rolled into the unit mechanism. Your 2150mm tall design should bleed at least a third of the way into this area to allow for any height variance of the unit and prevent any white edge showing.
Please allow a 6mm (30mm at full size) quiet area for any important content from the very top of the artwork (see guide). This will ensure the top metal rail doesn’t interfere with your design.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.
-
Greenwich Roller Banner
( reviews)Price range: £79.00 through £99.00-
- Senator Duo 850 (Standard)850mm-wide Senator Duo Roller Banner
-
- Senator Duo 1000 (Standard)1000mm-wide Senator Duo Roller Banner
These templates will help you create your design(s) at the correct size, shape and proportion for the Senator Duo Roller Banner, and are setup at 20% scale of full size.
The bottom 30mm area (150mm at full size) must only be used for background colours/images or left blank. This section will be hidden and rolled into the unit mechanism. Your 2150mm tall design should bleed at least a third of the way into this area to allow for any height variance of the unit and prevent any white edge showing.
Please allow a 6mm (30mm at full size) quiet area for any important content from the very top of the artwork (see guide). This will ensure the top metal rail doesn’t interfere with your design.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.
Marketing and Re-Sale Resources
Please log in to view our marketing resources.
If you do not have an account with us please register now. -
-
Hanging Banners
( reviews)£25.00Artwork
To help ensure your artwork is processed quickly and without any problems, please refer to our artwork requirements.
For any Double-Sided Block-Out PVC items, 10mm bleed must be supplied. This allows for movement when printing and cutting double-sided items.
Notice
Please be aware that banners are only temporary signage and we cannot be held responsible for any fitting or installation issues. As with all temporary signage they should be taken down in winds exceeding 30mph.
Artwork
To help ensure your artwork is processed quickly and without any problems, please refer to our artwork requirements.
-
Heavy Duty Banner Frame
( reviews)Price range: £230.00 through £295.00-
- 3m × 1m Banner Frame (Single-Sided)With one banner
-
- 3m × 1m Banner Frame (Double-Sided)With two banners
Artwork Requirements
These templates will help you to create your design at the correct size, shape and proportion. The templates are set at 20% scale.
-
-
Heras Fencing Banners
( reviews)£72.12Layers
- Instructions. Can be turned off or removed before exporting your print-ready file.
- Areas & Marks Overlay. Must only be used as an overlay and must not contain any design elements. Must be either turned off or removed before exporting your print-ready file.
- Design. Must be used to create and supply your design.
Shape
- The red line is the bleed line. Artwork must extend to this line. Any space between this line and the safe area line must only be used as a quiet area.
- The blue line is the finished line. This is the perimeter of the visible graphic area, after finishing.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within these lines.
Artwork Requirements
Artwork must be supplied:
- At the exact size of this template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With all important content inside the safe areas
- With background/quiet content all the way to the bleed lines
- With none of the template guide lines included or flattened
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked that all design elements are included
- With artwork for all sides included
-
Legend Roller Banner
( reviews)Price range: £139.00 through £159.00These templates will help you create your design at the correct size, shape and proportion for the Legend Roller Banner, and are setup at 20% scale of full size.
The bottom 30mm area (150mm at full size) must only be used for background colours/images or left blank. This section will be hidden and rolled into the unit mechanism. Your 2150mm tall design should bleed at least a third of the way into this area to allow for any height variance of the unit and prevent any white edge showing.
Please allow a 6mm (30mm at full size) quiet area for any important content from the very top of the artwork (see guide). This will ensure the top metal rail doesn’t interfere with your design.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.
-
- Legend 850mm-wide Legend Roller Banner
-
- Legend 1000mm-wide Legend Roller Banner
-
-
Mistral Lamp Post & Wall Display
( reviews)£97.00Marketing and Re-Sale Resources
Below is an unbranded product spec sheet for the Mistral Lamp Post & Wall Display that you can print, show on-screen or send to your customers. Spec sheets are not branded as Venture Banners in any way.
-
Orient Roller Banner
( reviews)Price range: £89.00 through £199.00These templates will help you create your design at the correct size, shape and proportion for the Orient Roller Banner, and are setup at 20% scale of full size.
The bottom 30mm area (150mm at full size) must only be used for background colours/images or left blank. This section will be hidden and rolled into the unit mechanism. Your 2150mm tall design should bleed at least a third of the way into this area to allow for any height variance of the unit and prevent any white edge showing.
Please allow a 6mm (30mm at full size) quiet area for any important content from the very top of the artwork (see guide). This will ensure the top metal rail doesn’t interfere with your design.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.
