Description
Product Overview
The striking and angled flag shape
Superb quality flags that your customers will be delighted with. Printed onto 117gsm Knitted Polyester with dye-sublimation process resulting in 80-90% show-through on the reverse.
- Suitable for both outdoor and indoor use
- Lightweight, portable and easy to assemble
- Printed using a dye-sublimation process for great show-through on the reverse
- Printed in-house with our VUTEk FabriVU 3.2m-wide dye-sublimation printers
- Finished in-house with our industrial sewing machines
- Includes high-performance aluminium and GRP poles (collapsible into multiple pieces)
- Available in four sizes
- Multiple options for bases (not included)
- Stable up to beaufort scale: 4 (13-18 mph)
Sleeve Colour
Our flags are fitted with black sleeves.
Right-Facing and Left-Facing Orientation
Our right-facing flags accommodate the pole and base on the left-hand side of the graphic. The left-facing flags accommodate the pole and base on the right-hand side of the graphic. Each orientation has respective artwork templates available, which must be used where applicable.
Double-Sided Flags
These consist of two knitted polyester flags with a blockout membrane sandwiched between the two. All three layers are stitched together and supplied as one item.
Please note, our flag bases are not intended to support the additional weight of double-sided flags. For this reason, flag bases are not covered by our warranty when used with double-sided flags.
Replacement Graphics
Need a new graphic without the pole? Replacement graphics are available at a reduced cost. Printed, finished and delivered direct to you or your client.
Shape
- The red line is the bleed line. Artwork must extend to this line. The area in between this line and the safe area line must only be used as a quiet area.
- The purple line is the cut line. Perimeter of the cut graphic area, before any finishing. The area in between this line and the finished line will be used for hems and attaching the sleeve.
- The blue line is the finished line. This is the perimeter of the visible graphic area, after the graphic has been finished.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within this line.
- The grey line is the flag sleeve. This shows the location of the elasticated flag sleeve, when finished and attached.
Layers
Please note, this template contains a locked layer that is set to be non-printing. Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.- Guide (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
- Design. Must be used to create and supply your design.
Artwork Requirements
Flag artwork must be supplied:- At the exact size of the template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With all important content inside the safe area
- With background/quiet content all the way to the bleed line
- With none of the template guide lines included or flattened
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked that all design elements are included
- With both front and back designs included (applies only to double-sided flag templates)
Reviews
There are no reviews yet.