Shop - Page 7 of 8 - Banner Press

Filter by

Showing 73–84 of 87 results

list grid

Table Top Banners
( reviews)
£25.00
Assembly Recommendations
1. Snap together the frame pieces, using the indicated number stickers.
2. Using the included gloves, slide the graphic over the frame. (To avoid the internal hems creating an uneven finish along the edge of the unit, apply the graphic twisted about 30-50mm towards the left or right. Slowly pull the graphic to the bottom of the frame. You will now have part of the rear graphic on the front, or vice-versa. Once the graphic is pulled as far downwards as possible, grip both left and right sides of the frame and twist the graphic into the correct position.)
3. Fasten the zip under the bottom edge of the frame.
4. Using the provided allen key, screw the frame into the base.
Notice

Stretch Fabric Premium stands are recommended for indoor use only, and are not suitable for outdoor use.

Please note, due to the nature of fabrics that are not completely opaque, when these graphics are subject to strong lighting (especially from above or behind), some visibility of the frame through the graphic is possible. To avoid this, we recommend limiting the amount of light above or behind the unit, as well as adjusting the positioning of the unit.

While we make every effort to finish these graphics as accurately and consistently as possible, due to the nature of printing, cutting and finishing fabrics, some material movement and minor imperfections in alignment can be introduced. For this reason, we highly recommend not wrapping continuous or detailed shapes between front and rear graphics.

Graphics can be washed in a regular washing machine on a 30° wash without detergents. Always allow graphics to completely dry before using or storing.
Add to cart
Teardrop Flag
( reviews)
Price range: £75.00 through £160.00
Shape
- The red line is the bleed line. Artwork must extend to this line. The area in between this line and the safe area line must only be used as a quiet area.
- The purple line is the cut line. Perimeter of the cut graphic area, before any finishing. The area in between this line and the finished line will be used for hems and attaching the sleeve.
- The blue line is the finished line. This is the perimeter of the visible graphic area, after the graphic has been finished.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within this line.
- The grey line is the flag sleeve. This shows the location of the elasticated flag sleeve, when finished and attached.
Layers

Please note, this template contains a locked layer that is set to be non-printing. Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.
- Guide (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
- Design. Must be used to create and supply your design.
Artwork Requirements

Flag artwork must be supplied:
- At the exact size of the template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With all important content inside the safe area
- With background/quiet content all the way to the bleed line
- With none of the template guide lines included or flattened
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked that all design elements are included
- With both front and back designs included (applies only to double-sided flag templates)
Select options
Thunder Outdoor Roller Banner
( reviews)
£210.00

The bottom 30mm area (150mm at full size) must only be used for background colours/images or left blank. This section will be hidden and rolled into the unit mechanism. Your 2150mm tall design should bleed at least a third of the way into this area to allow for any height variance of the unit and prevent any white edge showing.

Please allow a 6mm (30mm at full size) quiet area for any important content from the very top of the artwork (see guide). This will ensure the top metal rail doesn’t interfere with your design.

For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.

When supplying your print-ready artwork, please follow our artwork requirements.

Select options
Torque Indoor Banner Stand
( reviews)
Price range: £96.00 through £210.00
Select options
Torque Indoor Banner Stand
( reviews)
Price range: £155.00 through £270.00
1. Torque (Single-Sided on Standard PVC)2.4m × 2.4m Stand and Graphic
2. Torque (Double-Sided on Block-Out PVC)2.4m × 2.4m Stand and Double-Sided Graphic
3. Torque (Single-Sided on Display Polyester)2.4m × 2.4m Stand and Graphic
4. Torque (Double-Sided on Display Polyester)2.4m × 2.4m Stand and Graphic
These templates will help you create your design(s) at the correct size, shape and proportion for the Torque Indoor Banner Stand, and are setup at 20% scale of full size.

The top and bottom sections (indicated by the margins) will become the front of the pole pockets and should only be used as quiet areas (background colours/images). Any important content (text/logos) should be kept between the margins.

For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.

When supplying your print-ready artwork, please follow our artwork requirements.
Select options
Traditional Pop-Up Carry Case
( reviews)
£35.00
Add to cart
Traditional Pop-Up Counter
( reviews)
Price range: £45.00 through £65.00
Select options
Traditional Pop-Up Counter
( reviews)
Price range: £200.00 through £225.00

These templates will help you create your design at the correct size, shape and proportion for the Pop-Up Counter, and are setup at 20% scale of full size.

The central area indicated by the vertical guides represents the front of the graphic. Any artwork to the left or right of this area wraps around the sides and back of the unit.

For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.

When supplying your print-ready artwork, please follow our artwork requirements.

Select options
Traditional Pop-Ups
( reviews)
Price range: £429.00 through £699.00

These templates will help you create your design at the correct size, shape and proportion for the Traditional Pop-Ups, and are setup at 20% scale of full size.

The vertical guides indicate the splits between panels. It’s recommended to minimise the amount of text that crosses over the splits.

Please be aware that each end panel curves around the side of the unit and create your design accordingly. See the overhead illustration for positions of each panel.

For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.

When supplying your print-ready artwork, please follow our artwork requirements.

Select options
Traditional Pop-Ups (Lite)
( reviews)
Price range: £299.00 through £389.00
1. 2×3 Curved Pop-Up (Lite)Single-Sided
  
  3×3 Curved Pop-Up (Lite)Single-Sided
  
  4×3 Curved Pop-Up (Lite)Single-Sided
Have You Seen Our Alternative Products?

With a rigid standing frame that can be kept and re-used as well as easily-replaced graphics, fabric exhibition stands may be a better option in some situations.
- Stretch Fabric Walls
- SEG Fabric Pop-Ups
Select options
Wind Dancer
( reviews)
Price range: £149.00 through £299.00
1. 4m Wind Dancer
2. 5m Wind Dancer
3. Wind Dancer Carry Bag
Shape
- The red line is the bleed line. Artwork must extend to this line. The area inbetween this line and the safe area line must only be used as a quiet area.
- The purple line is the finished line. This is the perimeter of the cut graphic area, before any finishing. The area inbetween this line and the finished line will be used for hems.
- The blue line is the finished line. This is the perimeter of the visible graphic area, after all finishing.
- The green dashed line is the safe area lines. Important content (text, logos etc.) must be kept within this areas.
- The orange circles are the eyelet marks. This is the location and size of eyelets.
Layers
- Instructions (locked). Can be turned off or removed before exporting your print-ready file, if desired.
- Shape Overlay (locked). Must only be used as an overlay, and must not contain any design elements. Must be either turned off or removed before exporting your print-ready file.
- Eyelets (locked). Can be made visible to show where eyelets will be located.
- Design. Should be used to create and supply your design.
Select options
Xscape Tension Stand
( reviews)
Price range: £39.00 through £69.00
1. Small Xscape600mm × 1600mm
2. Medium Xscape800mm × 1800mm
3. Large Xscape1200mm × 2000mm
Select options