Showing 1–12 of 20 results
-
Crest Flag
( reviews)Price range: £75.00 through £160.00Shape
- The red line is the bleed line. Artwork must extend to this line. The area in between this line and the safe area line must only be used as a quiet area.
- The purple line is the cut line. Perimeter of the cut graphic area, before any finishing. The area in between this line and the finished line will be used for hems and attaching the sleeve.
- The blue line is the finished line. This is the perimeter of the visible graphic area, after the graphic has been finished.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within this line.
- The grey line is the flag sleeve. This shows the location of the elasticated flag sleeve, when finished and attached.
Layers
Please note, this template contains a locked layer that is set to be non-printing. Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.
- Guide (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
- Design. Must be used to create and supply your design.
Artwork Requirements
Flag artwork must be supplied:
- At the exact size of the template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With all important content inside the safe area
- With background/quiet content all the way to the bleed line
- With none of the template guide lines included or flattened
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked that all design elements are included
- With both front and back designs included (applies only to double-sided flag templates)
-
Deluxe Cafe Barriers
( reviews)Price range: £180.00 through £275.00Layers
- Instructions (locked). Can be turned off or removed before exporting your print-ready file, if desired.
- Areas & Marks Overlay (locked). Must only be used as an overlay, and must not contain any design elements. Must be either turned off or removed before exporting your print-ready file.
- Stitching (locked). Can be made visible to show where stitching will be located. (Applicable only to single-sided graphics)
- Design. Should be used to create and supply your design.
Areas & Marks
- The red line is the bleed line. Artwork must extend to this line. Any space between this line and the safe area line must only be used as a quiet area.
- The purple line is the trim line. The material is cut along this path.
- The blue line is the finished line. Perimeter of the visible area, after finishing.
- The green dashed line is the safe area line. Important content (text, logos etc.) must be kept within these areas.
- The grey line is the stitching line. Indicates the location of stitching along the pole pocket. This is on a separate layer that can be viewed, if desired. (Applicable only to single-sided graphics)
Artwork Requirements
Artwork must be supplied:
- With all template elements removed (such as lines, boxes and markings)
- Without any crop marks or other registration marks
- Using the full bleed area
- Including both pages (even if they are the same design) (double-sided graphics only)
- With any fonts outlined
- With any images embedded
- As either PDF (preferred), AI or EPS format
Please also refer to our full list of artwork requirements.
Considerations
Our thread colours are black or white. Our sewists will choose the most appropriate colour to complement your graphic.
Currently, the dye-sublimation process does not allow for the use of Pantone colours. Any Pantone colours must either be converted to (or replaced with) CMYK colours before supplying your print-ready file.
-
Hanging Banners
( reviews)£25.00Artwork
To help ensure your artwork is processed quickly and without any problems, please refer to our artwork requirements.
For any Double-Sided Block-Out PVC items, 10mm bleed must be supplied. This allows for movement when printing and cutting double-sided items.
Notice
Please be aware that banners are only temporary signage and we cannot be held responsible for any fitting or installation issues. As with all temporary signage they should be taken down in winds exceeding 30mph.
Artwork
To help ensure your artwork is processed quickly and without any problems, please refer to our artwork requirements.
-
Pole Banner
( reviews)£25.00Pole Pockets
A pocket is added to the edges you require to allow a pole to pass through and support/tension the banner.
The diameter of the pocket can be specified by you, however, if you let us know the diameter of the object to go into the pole pocket we can calculate the size of the pocket for you.
For help on setting up your artwork for these finishes, please refer to our artwork setup guide.
Notice
Please be aware that banners are only temporary signage and we cannot be held responsible for any fitting or installation issues. As with all temporary signage they should be taken down in winds exceeding 30mph.
Artwork
To help ensure your artwork is processed quickly and without any problems, please refer to our artwork requirements.
-
Pop-up Banners
( reviews)£25.00The bottom 30mm area (150mm at full size) must only be used for background colours/images or left blank. This section will be hidden and rolled into the unit mechanism. Your 2150mm tall design should bleed at least a third of the way into this area to allow for any height variance of the unit and prevent any white edge showing.
Please allow a 6mm (30mm at full size) quiet area for any important content from the very top of the artwork (see guide). This will ensure the top metal rail doesn’t interfere with your design.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.
Below is an unbranded product spec sheet for the Raptor Roller Banner that you can print, show on-screen or send to your customers. Spec sheets are not branded as Venture Banners in any way.
-
-
-
-
-
-
-
Retractable Banners
( reviews)£25.00Shape
- The red line is the bleed line. Artwork must extend to this line. The areas in between this line and the safe area line must only be used as a quiet area.
- The purple line is the cut line. This is the perimeter of the cut graphic area, before any finishing. The area in between this line and the finished line will be used for silicone edging.
- The blue line is the approx. finished line. This is the approximate perimeter of the visible graphic area, after the graphic has been fitted to the unit.
- The green line is the safe area line. Important content (text, logos etc.) must be kept within these lines.
Layers
Please note, these templates contain a locked layer that is set to be non-printing (.ai, .eps, .idml). Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.
- Guides (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
- Design. Must be used to create and supply your design.
Artwork Requirements
Artwork must be supplied:
- At the exact size of this template
- With all fonts outlined
- With all images embedded
- With all design elements on the Design layer
- With background/quiet content all the way to the bleed line(s)
- With all important content inside the safe area(s)
- With none of the template guide lines included or flattened
- With no crop marks, bleed marks, colour bars or other registration marks present
- As either PDF (preferred), AI or EPS format
- With exported files checked (e.g. in Adobe Acrobat/Reader) that all design elements are included
Please also refer to our full list of artwork requirements.
