Shape

• The red line is the bleed line. Artwork must extend to this line. The areas in between this line and the safe area line must only be used as a quiet area.
• The purple line is the cut line. This is the perimeter of the cut graphic area, before any finishing. The area in between this line and the finished line will be used for silicone edging.
• The blue line is the approx. finished line. This is the approximate perimeter of the visible graphic area, after the graphic has been fitted to the unit.
• The green line is the safe area line. Important content (text, logos etc.) must be kept within these lines.

Layers

Please note, these templates contain a locked layer that is set to be non-printing (.ai, .eps, .idml). Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.

• Guides (Non-Printing) (locked). Must not contain any of your design elements. May be deleted, if desired.
• Design. Must be used to create and supply your design.

Artwork Requirements

Artwork must be supplied:

• At the exact size of this template
• With all fonts outlined
• With all images embedded
• With all design elements on the Design layer
• With background/quiet content all the way to the bleed line(s)
• With all important content inside the safe area(s)
• With none of the template guide lines included or flattened
• With no crop marks, bleed marks, colour bars or other registration marks present
• As either PDF (preferred), AI or EPS format
• With exported files checked (e.g. in Adobe Acrobat/Reader) that all design elements are included

Please also refer to our full list of artwork requirements.